Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題一直保持高通過率

為了配合當前真正的考驗，我們的技術團隊隨著考試的變化及時更新 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題的問題和答案。同時也充分接受用戶回饋的問題，利用了這些建議，從而達到推出完美的 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題，使 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 題庫資料始終擁有最高的品質，高品質的 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam 古題資料能100%保證你更快和更容易通過考試，擁有高通過率，讓考生取得 Avaya Aura 認證是那麼的簡單。

這是一个为考生们提供最新 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 認證考試考古題，并能很好地帮助大家通過 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam 考試的网站。我們活用前輩們的經驗將歷年的考試資料編輯起來，製作出了最好的 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 題庫資料。Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題裏的資料包含了實際考試中的所有的問題，只要你選擇購買考古題產品，我們就會盡全力幫助你一次性通過 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 認證考試。

短時間高效率的 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題

Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題可以給你通過考試的自信，讓你輕鬆地迎接考試，利用這個 7004.1 考古題，即使你經過很短時間段來準備，也能順利通過 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam 考試。這樣花少量的時間和金錢換取如此好的結果是值得的。

想通過 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試並不是很簡單的，如果你沒有參加一些專門的相關培訓是需要花很多時間和精力來為考試做準備的，而 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題可以幫助你，該考題通過實踐檢驗，利用它能讓廣大考生節約好多時間和精力，順利通過考試。

本著對考古題多年的研究經驗，為參加 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試的考生提供高效率的學習資料，來能滿足考生的所有需求。如果你想在短時間內，以最小的努力，達到最有效果的結果，就來使用我們的 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題培訓資料吧！

購買後，立即下載 7004.1 試題 (Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam): 成功付款後, 我們的體統將自動通過電子郵箱將你已購買的產品發送到你的郵箱。（如果在12小時內未收到，請聯繫我們，注意：不要忘記檢查你的垃圾郵件。）

Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 題庫具備很強的針對性

能否成功通過 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試，並不在於你看了多少東西，而在於你是否找對了方法，Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam 考古題就是你通過考試的正確方法。我們為你提供通過 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試針對性的復習題，通過很多考生使用證明我們的考古題很可靠。

Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 題庫是很有針對性的考古題資料，可以幫大家節約大量寶貴的時間和精力。Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考古題練習題及答案和真實的考試題目很接近，短時間內使用模擬測試題你就可以100%通過 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試。

你還可以免費下載我們為你提供的部分關於 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 練習題及答案的作為嘗試，那樣你會更有信心地選擇我們的產品來準備你的 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam 考試，你會發現這是針對 Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam - 7004.1 考試最好的學習資料。

最新的 Avaya Aura 7004.1 免費考試真題:

1. When configuring Zone Based Dialing, what option would you select to create new zones for routing calls through a centralized Call Server?

A) Dialing Configuration Details for Flexible Dial Plan link
B) Numbering Zones link
C) Dialing Configuration Details link
D) Bandwidth Zones link

2. Due to Directory Number conflicts in the Communication Server 1000 network, the
customer wants to route calls by Home Location Codes (HLOC) and Location Codes (LOCs).
Consider the following Home Location Codes.
HLOC for system A = 329
HLOC for system B = 429
What LOC should be provisioned for system A?

A) LOC for System A = 329
B) LOC for System A = 3
C) LOC for System A = 429
D) LOC for System A = 49

3. Click the Exhibit button.

Consider a company's dialing plan shown in the exhibit and an example for its requirements:
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-2212581. This would be an On-Net call and the NARS programming must remove the LOC code and dial the DN internally.
What programming would remove the location code for a call dialed within the originating Communication Server 1000 to a DN on that same Communication Server 1000?

A) The location codes for each site would be programmed under the LOC programming in Translation Table #2 at all locations.
B) Each site would have its own Location Code programmed as a Home Location Code (HLOC) under Translation Table #1 in their CS 1000.
C) Home NPA Codes (HNPA) for each site would be programmed under Translation Table #1 at each location in their CS 1000.
D) Each site would have the Location Codes for all sites programmed as Home Location Codes (HLOC) in Translation Table #1 of their CS 1000.

4. An existing customer upgraded to Communication Server 1000 RIs 7.5 but plans on staying on an H.323 network environment until their key systems in the network get upgraded to SIP. Their last 7.0 system is just now being put into service and you are configuring the H.323 Gateway Properties using Element Manager.
What is the correct entry for the Primary Gatekeeper IP address?

A) Signaling Server T-LAN IP that runs the Gatekeeper application
B) Node ID assigned to the site where the Call Server is located
C) Private domain name field for the Gatekeeper
D) Signaling Server E-LAN IP that hosts the Primary Re-direct Server

5. The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?

A) Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B) Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C) Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D) Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)

問題與答案：