최신 IBM Certifed Systems Expert A4040-121 무료샘플문제:
1. A customer has multiple POWERS 570 servers. The servers are controlled by multiple HMCs. The customer is installing an additional Power 770 server in this environment but will retain their existing HMCs. No updates to FSP or HMC levels have been made since installation of the POWERS servers.
After reviewing the cover letters for ESP and HMC firmware levels, what updates are required to support the addition of the new server into the network?
A) Update only the FSPs to the latest release available.
B) Update the FSP5 and HMC5 of the existing systems to the minimum level required.
C) Update the POWERS ESPs to the most recent version available for the installed firmware release. Update the HMCs to the most recent release available.
D) Update only the HMCs to the latest version.
2. What boot mode is required when installing a hosted AIX or Linux partition?
A) Open Firmware OK prompt (OPEN_FIRMWARE)
B) Diagnostic with default boot list (DIAG_DEFAULT)
C) Diagnostic with stored boot list (DIAG_STORED)
D) System Management Services (SMS)
3. What minimum hardware and software levels are required to host IBM i on other IBM i partitions?
A) POWER5+ or newer, IBM i 6.1 or newer
B) POWER6 or newer, IBM i 6.1 or newer
C) POWER5+ or newer, IBM i 5.4 or newer
D) POWER6+ or newer, IBM i 7.1 or newer
4. A customer with an IBM i environment containing an iASP runs a Save 21 monthly. Normally the save takes about 5 hours. This month, the save took less than an hour. No errors were encountered on the save, and the amount of data in *SYSBAS and the ASP hasn't changed significantly. What is the most likely explanation for the difference in time required to process the save?
A) The ASPGRP was not correctly set in the backup job description.
B) The iASP was notvaried on before the Save 21 was processed.
C) Entry to the iASP was locked by a system task.
D) The user performing the save didn't have *ALLOBJ authority.
5. An administrator wants to share a fibre attached TS3100 tape library between multiple IBM i 7.1 partitions. The system contains a PC #5774 - 4Gb fibre adapter and uses an IBM fibre switch. All IBM i partitions are hosted by VIO Server (VIOS).
How could the administrator configure the sharing of the tape library?
A) In the HMC, select the VIOS partition, then select Operations - Schedule Operations - Options New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions.
B) In the HMC, select the host Power System, then select Operations - Schedule Operations New. Create a new Scheduled Dynamic Reconfiguration operation to move the fibre adapter between partitions.
C) Create a script that can be called after each backup job in a partition finishes, which will move the fibre adapter to the next partition
D) Configure NPIV within VIOS, then configure each partition to use NPIV to share the tape library.
질문과 대답:
| 질문 # 1 정답: B | 질문 # 2 정답: D | 질문 # 3 정답: B | 질문 # 4 정답: B | 질문 # 5 정답: C |
1275 개 고객 리뷰
품질과 가치ITCertKR 의 높은 정확도를 보장하는 최고품질의 덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.
테스트 및 승인ITCertKR 의 덤프는 모두 엘리트한 전문가들이 실제시험문제를 분석하여 답을 작성한 만큼 시험문제의 적중률은 아주 높습니다.
쉽게 시험패스ITCertKR의 테스트 엔진을 사용하여 시험을 준비한다는것은 첫 번째 시도에서 인증시험 패스성공을 의미합니다.
주문하기전 체험ITCertKR의 각 제품은 무료 데모를 제공합니다. 구입하기로 결정하기 전에 덤프샘플문제로 덤프품질과 실용성을 검증할수 있습니다.
