최신 Avaya-Certification 31861X 무료샘플문제:
1. A Sales Engineer is designing an Avaya Aura 8.x solution where 900 video users are being added. There is enough bandwidth for all users to establish video calls at 6 Mbps.
Which video codec will provide the best video quality that the network will support?
A) H.262
B) H.264
C) H.263
D) H.261
2. You are creating a new Communication Manager design. You have included Avaya provided servers with G450 gateways. The solution requires 200 - H.323 telephones. Trunk service from the PSTN will be IP trunks. Shuffling will be enabled. They have also requested call recording via Device Media Call Control (DMCC) application programming interface.
To record all IP endpoints simultaneously, how many DSP resources are required?
A) 800 DSP resources
B) 600 DSP resources
C) 400 DSP resources
D) 200 DSP resources
3. If a customer has an Avaya Aura 7.0 and shuffling is turned on within Communication Manager, which statement describes the media processing resource (DSP) requirements for a two-party call originated statement describes the media processing resource (DSP) requirements for a two-party call originated by a SIP station and terminated by an .H323 IP Trunk being recoded?
A) SIP-SIP two-calls calls will use SIP Direct Media, so no media-processing channels are required for this call.
B) This call cannot shuffle, and one media-processing channel is required for the entire call.
C) Multi-party (i.e. 3-party or greater) calls cannot shuffle, and require media-processing channels for the entire call.
D) This call will shuffle after initial call set-up; i.e., one media-processing (DSP) channel is required for the first 20 seconds of the call, for each party.
4. When designing an Avaya Aura solution, what are two design requirements that require the installation of a G430 or G450 Gateway? (Choose two.)
A) DSP resources
B) SIP devices
C) T.38 Fax
D) TDM trunks
5. A customer wants to prevent additional calls from being established, and to preserve the quality active calls when the capacity limit on the WAN link is reached. The branch inter-office communication use rate is one trunk for every 20 users over the customer's star topology WAN. 600k of the WAN bandwidth is dedicated to voice.
Assuming G.729 (30k bandwidth per call) is used, which Call Admission Control (CAC) limit will meet the customer s requirement?
A) Set the CAC limit to 2 Mbps just for voice traffic at the headquarters main office WAN connection.
B) Set the CAC limit to 200 intra-branch calls globally in the WAN network.
C) Set the CAC limit to 10 incoming calls and 10 outgoing inter-branch calls at each branch.
D) Set the CAC limit to 20 inter-branch calls for each branch location.
질문과 대답:
질문 # 1 정답: A | 질문 # 2 정답: A | 질문 # 3 정답: B | 질문 # 4 정답: A,C | 질문 # 5 정답: D |